Ricoh Pro C5200s User Manual page 242

9. Troubleshooting
Message
"Cannot display preview of
this page."
"Cannot punch this paper
size."
"Cannot staple paper of this
size."
"Check paper size."
"Duplex is not available with
this paper size."
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
"Exceeded the maximum
number of multi-sheet fold.
Printing will be cancelled."
240
Cause
The image data may have
been corrupted.
The Punch function cannot
be used with paper size
selected.
The Staple function cannot
be used with paper size
selected.
An irregular paper size is
set.
A paper size not available in
Duplex mode has been
selected.
The number of pages the
user is permitted to copy has
been exceeded.
A print job was canceled
because more than the
maximum number of multi-
sheet folds was specified.
Solution
Press [Exit] to display the preview
screen without a thumbnail.
If the selected document contains
several pages, press [Switch] on the
"Display Page" area to change the
page, and then a preview of the next
page will appear.
For details about paper, see
"Specifications for Punch Unit (Finisher
SR4120, Booklet Finisher SR4130)" or
"Specifications for Punch Unit (Finisher
SR5070, Booklet Finisher SR5080)",
Maintenance and Specifications.
Select a proper paper size. For details
about paper, see "Specifications for
Finisher SR4120", "Specifications for
Booklet Finisher SR4130",
"Specifications for Finisher SR5070",
or "Specifications for Booklet Finisher
SR5080", Maintenance and
Specifications.
If you press the [Start] key, the copy
will start using the selected paper.
Select a proper paper size. For details
about paper, see "Specifications for
the Main Unit", Maintenance and
Specifications.
For details about how to check the
number of copies available per user,
see "Managing Print Volume per User",
Security Guide.
Specify fewer sheets for the multi-sheet
fold function.
For details about the maximum number
of multi-sheet fold, see "Fold", Copy/
Document Server.