Rowenta DW6000 User Manual page 24

PROBLEMS?
Problems Cause
The iron is plugged No mains supply.
in, but the soleplate
of the iron remains
cold.
Temperature control set too
low.
The automatic electronic
cut-out* is active.
Steam control set on dry
None or too little position
steam is being
Not enough water in the
emitted.
water tank.
Anti-Drip* is active
(§ 11).
Residues in the steam
Brown streaks
chamber or on the soleplate.
come through the
holes inthe
soleplate and stain
Use of chemical descaling
the linen.
agents.
Fabric fibres have
accumulated in the holes of
the soleplate and are
burning.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Use of starch.
Pure distilled /
demineralised or softened
water is being used.
Overuse of shot of steam
Iron is leaking.
button.
Soleplate temperature too
low .
If you have any product problems or queries please contact our Customer Relations Team first
for expert help and advice:
0845 602 1454 - UK (01) 677 4003 - Ireland or consult our wesbite - www.rowenta.co.uk
Solution
Check that the mains plug is properly
inserted or try plugging the iron into a
different socket.
Set the temperature control to a higher
temperature.
Move your iron.
Turn the steam control to the required
. setting area.
Fill the water tank.
Wait for the soleplate to reach the
correct temperature.
Use the Self Clean function then clean
your iron.
Do not add any descaling agents to the
water in the water tank. Use the Self
Clean function and clean your iron.
Clean the soleplate with a non-metallic
sponge.
Vacuum the holes of the soleplate from
time to time.
Ensure linen is rinsed thoroughly to
remove any soap deposits or chemicals
on new garments which may be sucked
by the iron.
Always spray starch onto the reverse
side of the fabric to be ironed and clean
your iron soleplate.
Only use untreated tap water or mix
half tap water with half
distilled/demineralised water. Use the
Self Clean function and clean your iron.
Allow more time between each shot.
Set the temperature control to a higher
temperature.
Subject to modifications !
* depending on model
DE
FR
EN
NL
SV
NO
FI
DA
IT
ES
PT
EL