2. Turn straight pipe clockwise to lock it into place.
3. Tighten screw securely.
4. Remove tube retaining screw from the straight tube. Align grooves
6. Tighten screw securely.
INSTALL VACUUM TUBE
WARNING
Never perform maintenace or assembly prodecures with engine run-
fasten grid securely.
1. Remove screw in fan grid. Pull fan grid out for access to tube
clamp.
2. Loosen screw in clamp.
mount until completely seated. Position the tube so that the bevel
faces down in the operating position.
4. Secure vacuum tube with clamp by tightening screw in clamp.
5. Align grooves in vacuum elbow with pegs on air outlet and install
vacuum elbow.
ward.
7. Place vacuum bag opening over end of vacuum elbow and secure
with velcro strap.
(
)
OPTIONAL
DANGER
P
OWER
O
'
PERATOR
S
Screw
-
B
LOWER
11
M
ANUAL
Clamp