Table of Contents
Advertisement
T
he TV's audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV 1 Input Jacks located on the
back of the TV.
1
Connect the VIDEO (yellow) cable to
the VIDEO AV 1 in jack on the back of
the TV.
2
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
3
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
4
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5
Turn the VCR (accessory device) and
the TV ON.
6
Press the CH + or – buttons on the
remote control to scroll the channels
and select the AV 1 channel. AV 1 will
appear in the upper left corner on the
TV screen.
7
With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the television.
c c C
I
HECK
Remember to select the AV channels, use the
CH + or – buttons to scroll the series of
channel below the lowest numbered channel
(gernerally below channel 2).
U
SING THE
O
T
UT
AV 1 I
J
NPUT
ACKS
6
AV 3
AV 2
CVI
AV 1
6
5
7
BACK OF TV
2
AUDIO IN
(RED/WHITE)
BACK OF VCR
4
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
1
VIDEO IN
(YELLOW)
3
7
Advertisement
Table of Contents
