Connecting External Speakers - Philips 32RF52S Directions For Use Manual

32" real flat stereo color television
Hide thumbs Also See for 32RF52S:
Table of Contents

Advertisement

C
ONNECTING
T
his television is equipped with External
Speaker Jacks. External Speakers can be
used for rear speakers or to widen the stereo
coming from the television.
For this connection a set of right and left
external speakers (not supplied with the tele-
vision) along with two lengths of twin lead
speaker wire will be needed.
1
Connect one end of both twin lead
speaker wires to each of the external
speakers (right and left) being used.
2
Connect the other ends of the twin
lead speaker wire to the External
Speaker, right and left, 8Ω speaker
connectors. (Be sure that the connec-
tion is properly connected + to + and –
to – from the speakers to the television
jacks.)
At this point, the televisions sound should be
able to be heard through the external speak-
ers. If no sound is being heard through these
speakers, please check the connection or
repeat the connection sequence.
E
S
XTERNAL
PEAKERS TO THE
+
-
13
T
ELEVISION
2
Twin Lead
Speaker Wire
External 8Ω (ohm) Speakers
JACK PANEL
Located on the
back of the TV
1
+
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

32-real flat stereo color television 32rf52sColor tv

Table of Contents