CHECK THE FAILURE CODE (F-code)
■ When the oven has some failure on cooking,
-. Cancel the cook.
-. In case of failure, F-code will not display.
-. It memorizes F-code logs in EEPROM.
■ Check the failure code as below steps.
1. press the "clear" key
2. press the "BAKE" and "BROIL" key at the same time for 1 second.
If the oven has some failure, the oven will show the failure code, like FIG. 1
It shows the type of F-code and times of occurred failure alternately for each two seconds
Type of F-code
TIMER
TIMER
DELAY
DELAY
TIMED
TIMED
BAKE
BAKE
BROIL
BROIL
WARM
WARM
2 second
If the oven does not have any failure, the oven will display like FIG. 2
TIMER
DELAY
TIMED
BAKE
BROIL
WARM
< FIG. 2 >
NOTE:
After checking the failure code, press the "CLEAR" key
HR
HR
CLEAN
CLEAN
LOCKED
LOCKED
< FIG. 1 >
HR
CLEAN
LOCKED
Times of the occurred failure
TIMER
DELAY
TIMED
BAKE
BROIL
8-1
HR
WARM
CLEAN
LOCKED
2 second