REMOVING THE CASE ASSEMBL
REMOVING THE CASE ASSEMBL
(COOKT
(COOKT
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the cooktop plate (See "REMOVING
THE COOKTOP PLATE" on page 3-7).
3. Remove the manifold panel by unfastening the 9
phillips head screws.
COMPONENT ACCESS
OP BURNER ASSEMBL
OP BURNER ASSEMBL
4. Remove the tubing fitting (5/8-inch).
5. Remove 5 phillips head screws.
(LRG3091ST, LRG3091SB, LRG3091SW)
5-1. Remove 2 phillips head screws
(LRG3091ST /01, LRG3091SB /01,
LRG3091SW /01 LRG3091ST /02,
LRG3091SB /02, LRG3091SW /02)
3-9
Y
Y
Y)
Y)
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
5 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws
2 screws