Getting Started; Welcome; Installation - Triax TR 43 User Manual

TR 43
1.

GETTING STARTED

1.1 Welcome

If you use the STB for the first time, the "Welcome" menu appears.
Press cursor button to setup the Region, Language, Display Mode
and Aspect Mode.
Highlight "OK" and press the "OK" button to start channel search.

1.2 Installation


Press the "MENU" button to enter main menu.

Press "UP"or " DOWN " button to highlight "Installation",
press

"RIGHT" button to enter the Installation menu.

Press "UP" or "DOWN" cursor button to highlight the
desired item and press "OK"button to enter the sub-menu .

Press "EXIT" button to exit.
Channel Scan

Select "DVBT Channel Scan", press the "OK" button to enter
the Channel Scan menu.

Press cursor button to set Scan mode, Scan Band
,Channel No., Frequency and Bandwidth, then highlight
"Search", press "OK" button to start channel scan .
Auto Scan

Select the "Auto Scan", press "OK" button to enter the Auto
Scan menu.

Press the cursor button to set "FTA Only", then highlight
"Search", press the "OK" button to start auto scan .
LCN (logical Channel Number)

If LCN( Logical Channel Number) Select function is
activated, you can't change the original number of TV
channels by scanning .

You can activate/disactivate the LCN function by setting
the "LCN " to on/off.
9
EN