Specification - LG 55LF5950 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LED TV used LA50H
chassis.
2. Test condition
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C, CST: 40 °C ± 2 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : UL, CSA, IEC specification
- EMC: FCC, ICES, IEC specification
- Wireless : WirelessHD Specification (Option)
4. General Specification
No Item
1 Market
2 Receiving System
3 Input Voltage
4 Available Channel
5 Aspect Ratio
6 Tuning System
7 LCD Module
8 Operating Environment
9 Storage Environment
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
North America
ATSC / NTSC-M / 64 QAM / 256 QAM
AC 100 ~ 240V 50/60Hz
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
16:9
FS
TBD
NC430EUN-AACR1
NC490EUN-AACR1
LC550DUE-MGA3
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
- 6 -
AC 120V, 50/60Hz on the label (USA)
LGD 32LF5900-UA
LGD 43LF5900-UA
LGD 49LF5900-UA
LGD 55LF5950-UB
Remark
LGE Internal Use Only