Table of Contents
Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LED TV used LD75H
chassis.
2. Requirement for Test
Each part is tested as below without special notice.
(1) Temperature : 25°C ± 5°C (77°C ± 9°C), CST : 40°C ± 5°C
(2) Relative Humidity : 65 % ± 10 %
(3) Power Voltage :
Standard input voltage (AC100~240V @ 50/60Hz)
Standard Voltage of each product is marked by models
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment
4. General Specification
No
Item
1
Receiving system
2
Available Channel
3
Input Voltage
4
Market
5
Aspect Ratio
6
Tuning System
7
Operating Environment
8
Storage Environment
SPECIFICATION
Specification
ATSC / NTSC-M, 64 & 256 QAM
VHF : 02~13
UHF : 14~69
DTV : 02-69
CATV : 01~135
CADTV : 01~135
AC 100 ~ 240V@ 50/60Hz
North America
16:9
FS
Temp : 0 ~ 40 deg
Humidity : ~ 80 %
Temp. : -20 ~ 60 deg
Humidity : ~ 85%
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
AC 120V, 50/60Hz on the label (USA)
Rear gender(1EA)
- 6 -
Copyright ©
Only for training and service purposes.
Remark
LG Electronics. Inc. All rights reserved.
Advertisement
Table of Contents
