Table of Contents
Advertisement
Setting Sleep Mode
R
L
When Sleep Mode is used, you cannot use the Remote Controller to adjust the set temperature and the boiler will
operate in DUAL MODE. Once the Sleep Mode is deactivated, the unit will reset back to the previous set temperature.
Example of Temperature Change in Sleep Mode
ex) initial temperature at 36'C and sleeping duration of 8 hours
Sleeping temperature for Navien Mate can be set up to 99°F (37°C), the optimum sleeping temperature.
While the initial temperature can be set at 99°F (37°C), in that case the temperature remains at 37°C in the first
phase(for the first hour.)
Controlling at Boiler
Continue to touch [ MODE ] button until
to activate Sleep Mode
1. When setting dual heating
When both L and R appears on the status window, press the dial,
set initial sleeping temperature and press the dial again.
(Temperature can be set between 86°F (30°C) to 99°F (37°C)
Rotate the dial to choose sleeping duration and press the dial.
2. When setting individual heating for right and left side
When both L and R appears on the status window, rotate the
dial toward left to choose left side heating and press dial to
confirm once L sign is indicated.
When temperature to the left side flickers, rotate the dial to
set sleeping duration and press the dial. (initial sleeping
temperature can be set between 86°F (30°C) to 99°F (37°C)
and setting OFF
activates general mode instead of Sleep Mode)
When temperature to the left side flickers, rotate the dial to
set sleeping duration and press the dial. (Sleeping duration
can be set between 5 hours to 10 hours, and setting OFF
activates general mode instead of Sleep Mode)
Once settings for left side is complete, it automatically moves
to settings for right side.
Set the same initial sleeping temperature and sleeping duration
for both sides.
<Graph showing temperature change in Sleep Mode>
ramp is turned on
21
Hide quick links:
Advertisement
Table of Contents
