Door Hinge Disassembly - Viking VDB200 Service Manual

Service Diagnostics and Procedures

Door Hinge Disassembly

To access door hinge, slide unit out of the
installation. Next remove the outer door panel (see
Outer Door Removal section, page 21).
Disconnect tension cable from hinge.
Hinge
Hinge
Connection
Remove C-Clip securing hinge.
C-Clip
Hinge
Note: Remove C-Clip slowly (clip has spring and
can dislodge).
© 2010 Viking Preferred Service
Remove two screws that hold each hinge to the
inner door. Repair or replace the hinge as necessary.
Tension Cable
Reverse the procedure to reinstall the hinge.
Screw
Hinge
25