LGE
Establish:
Reform:
6 seconds, R/G/B value is not lower than 10, replace Eye Q II sensor
Step 5) Remove your hand from the Eye Q II sensor and wait for 6 seconds
Step 6) Confirm that "ok" pop up.
If change is not seen, replace Eye Q II sensor
5.3 Option selection per country
5.3.1 Overview
▪ Option selection is only done for models in Non-USA North America due to rating
▪ Applied model:
5.3.2 Method
1) Press ADJ key on the Adj. R/C, then select Country Group
2) Depending on destination, select KR or US, then on the lower Country option, select US,
CA, MX. Selection is done using +,
5.4 Tool Option selection
▪ Method: Press Adj. key on the Adj. R/C, then select Tool option.
Model
42LW6500-CA(HK)
47LW6500-CA(HK)
55LW6500-CA(HK)
47LW6500-CA(CN)
55LW6500-CA(CN)
6. GND and Internal Pressure check
6.1 Method
1) GND & Internal Pressure auto-check preparation
- Check that Power Cord is fully inserted to the SET.
LCD Division
LC12C Adjust Specification
LC12C
Chassis applied None USA model (CHINA ,HONGKONG)
Tool 1
Tool 2
33030
5397
33032
5397
33035
5397
33032
5397
33035
5397
Menu(TBD)
-
KEY(TBD)
Tool 3
Tool 4
3327
17577
3327
17577
3327
17577
3263
17569
3263
17569
Tool 5
Tool 6
48725
5830
48725
5830
48725
5830
48721
5830
48721
5830
LG Electronics
LG(51)