Equipment Connection Map - LG 47LW6500 Service Manual

LGE
Establish:
Reform:
▪ W/B adj. Objective & How-it-works
- Objective: To reduce each Panel's W/B deviation
- How-it-works: When R/G/B gain in the OSD is at 192, it means the panel is at its Full Dynamic
-Adj. condition : normal temperature
1) Surrounding Temperature: 25±5℃
2) Warm-up time: About 5 Min
3) Surrounding Humidity: 20% ~ 80%
5.1.2 Equipment
1) Color Analyzer: CA-210
2) Adj. Computer(During auto adj., RS-232C protocol is needed)
3) Adjust Remocon
4) Video Signal Generator MSPG-925F 720p/216-Gray(Model:217, Pattern:78)
→ Only when internal pattern is not available
▪Color Analyzer Matrix should be calibrated using CS-1000

5.1.3 Equipment connection MAP

5.1.4 Adj. Command (Protocol)
<Command Format>
START
LC12C Adjust Specification
Range. In order to prevent saturation of Full Dynamic range and data, one of
R/G/B is fixed at 192, and the other two is lowered to find the desired value.
(LED Module : CH
Probe
※If TV internal pattern is used, not needed
6E A 50 A LEN
LCD Division
14)
RS-232C
※
Signal
Source
A 03 A CMD
Color Analyzer
RS-232C
Computer
RS-232C
Pattern Generator
A 00 A VAL A
LG Electronics
LG(51)
CS A