Option Selection Per Country; Magic Motion Remote Controller Check; Country Group Selection; Tool Option Inspection - LG 65LF6300 Service Manual

▪ Standard color coordinate and temperature using
CA-210(CH-14) – by aging time
(1) Normal line in Korea (From January to February) : LGD
(LB5xxx, LB6xxx, LB7xxx, LB8xxx Series models)
Aging time
X
(Min)
271
1 0-2 286
2 3-5 284
3 6-9 282
4 10-19 279
5 20-35 276
6 36-49 274
7 50-79 273
8 80-119 272
9 Over 120 271
▪ Standard color coordinate and temperature using
CA-210(CH-14) – by aging time
(2) Normal line in Korea (From March to December) : LGD
(LB5xxx, LB6xxx, LB7xxx, LB8xxx Series models)
Normal line in Mexico : LGD (LB5xxx, LB6xxx, LB7xxx,
LB8xxx Series models)
Aging time
X
(Min)
271
1 0-2 282
2 3-5 281
3 6-9 279
4 10-19 277
5 20-35 275
6 36-49 274
7 50-79 273
8 80-119 272
9 Over 120 271
(3) O/S Module(AUO, INX, Sharp, CSOT, BOE)
cool
x y
spec 271 270
target 278 280
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Cool Medium Warm
Y X Y X
270 286 289 313
295 301 314 328
290 299 309 326
287 297 306 324
283 294 302 321
278 291 297 318
275 289 294 316
272 288 291 315
271 287 290 314
270 286 289 313
Cool Medium Warm
Y X Y X
270 286 289 313
289 297 308 324
287 296 306 323
284 294 303 321
280 292 299 319
277 290 296 317
274 289 293 316
272 288 291 315
271 287 290 314
270 286 289 313
med warm
x y x
286 289 313
293 299 320

5.2. Option selection per country

5.2.1. Overview
(1) Tool option selection is only done for models in Non-USA
North America due to rating
(2) Applied model: LA42B Chassis applied to CANADA and
MEXICO
Y
329

5.2.2. Country Group selection

354
(1) Press ADJ key on the Adj. R/C, and then select Country
349
Group Menu
(2) Depending on destination, select US, then on the lower
346
Country option, select US, CA, MX.
342
Selection is done using +, - KEY
337

5.2.3. Tool Option inspection

334
▪ Press Adj. key on the Adj. R/C, then select Tool option
331
Model Tool 1 Tool 2
330
43LF6300- 2007 4626
329
UA
* Tool option can be reconstructed by Software

5.3. Magic Motion remote controller Check

5.3.1. Test equipment
▪ RF-remote controller for check, IR-KEY-CODE remote
controller.
▪ Check AA battery before test. A recommendation is that a
tester change battery every lots.
Y
329
5.3.2. Test
348
(1) Make pairing with TV set by pressing "Start key(Wheel
346 key)" on RCU.
(2) Check a cursor on screen by pressing 'Wheel key" of RCU
343
(3) Stop paring with TV set by pressing "Back+ Home" key of
339
RCU
336
5.3.3. Applied models
333
Chassis
331
LA51H
330
329
y
329
339
- 18 -
Tool 3 Tool 4 Tool 5 Tool 6 Tool 7
33153 64774 8870 3708 43563
Model Name Magic RF receiver
43LF6300-UA
LGE Internal Use Only
Tool 8 Area
65535 22282
Built-in