Connection Of External Equipment; Aerial Socket; Euro Scart Socket; Audio/Video In Sockets - LG 27LZ50C Owner's Manual

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket of
the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.

Euro scart socket

1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
want to keep on watching in TV mode, press the
BER buttons.
Otherwise press the TV/AV button on the remote control hand-
set to select AV1. The VCR playback picture appears on the
screen.
You can also record programmes received by the TV on video
tape.

Audio/Video in sockets

1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2. Press the TV/AV button to select AV2 or AV3.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
D D E E or NUM-
/
VCR
VCR
VCR
VCR
25