Haier LT32A1 Service Manual page 23

Connecting to a PC
1. Turn off the HDTV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end to the VGA input at
the rear of the HDTV.
3. Connect the Audio Out on your computer to the AUDIO input at the rear of the HDTV.
4. Turn on the HDTV and PC.
5. Select VGA using the SOURCE button on the remote, side of the HDTV or directly by pressing the PC button on
the Remote.
NOTE: For the best picture quality when connecting a computer through VGA, set your computer timing mode to
native
resolution of panel. Please refer to the PC or graphic card's user guide for additional information on how to set the
timing mode and the video output requirements of the product.
23