Table 24: The Wireless: Basic Settings Screen (2.4G) - Hitron CGNM-2250 User Manual

The following table describes the labels in this screen.
Table 24: The Wireless: Basic Settings Screen (2.4G)
Basic Settings
Wireless Enabled
Wireless Mode
Wireless Channel
WPS Enabled
Multiple SSID Settings
Primary SSID
Network Name (SSID) Enter the name that you want to use for this SSID. This
76 76
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Use this field to turn the 2.4GHz wireless network on or
off.
Select ON to enable the wireless network.
Select OFF to disable the wireless network.
Select the type of 2.4GHz wireless network that you
want to use:
802.11 B/G Mixed: use IEEE 802.11b and 802.11n
802.11 11N Only: use IEEE 802.11n
802.11 B/G/N Mixed: use IEEE 802.11b, 802.11g
and 802.11n
802.11 G/N Mixed: use IEEE 802.11g and 802.11n
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 11B/G/N (default).
Select the 2.4GHz wireless channel that you want to
use, or select Auto to have the CGNM-2250 select the
optimum channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
Use this field to turn Wifi Protected Setup (WPS) on or
off on the 2.4GHz network.
Select ON to enable WPS.
Deselect OFF to disable WPS.
Click this to view settings for the main 2.4GHz SSID.
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
2012 Hitron Technologies
2014 Hitron Technologies
WIRELESS