Sound Menu Controls - Philips 27PT5441, 32PT5441, 27PT6441, 27PT6442 User Manual

S
16
T
o adjust your TV sound, select and
use the Sound Menu Controls listed
below:
1
Treble: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the control. The control
will enhance the high frequency
sounds.
2
Bass: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the control. The control
will enhance the low frequency
sounds.
3 Balance: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the level of sound com-
ing from the left and right speak-
ers.
4
AVL: (Auto Volume Leveler)
Press the CURSOR RIGHT 2
or LEFT 1 buttons to turn the
control On or Off. When On, AVL
will level out the sound being
heard when sudden changes in
volume occur during commercial
breaks or channel changes.
5
Incr. Surround: Press the CUR-
SOR RIGHT 2 or LEFT 1 but-
tons to select between Dolby
Virtual or Stereo settings (If
Stereo), or select Spatial or Mono
(If Mono).
6
SAP: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to toggle this control to On or Off.
SAP is short for Secondary Audio
Programming and is sent as a
third audio channel, a SAP signal
can be heard apart from the cur-
rent TV program sound.Note: If
SAP is not present on a selected
show No SAP will appear on the
screen.
7
Sound: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to select between Stereo or Mono
settings. Note: If Stereo is not
present on a selected show and the
TV is placed in the Stereo mode,
the sound coming from the TV
will remain in the Mono mode.
M
OUND ENU CONTROLS
Main
Picture
Sound
Features
Install
Treble
Bass
Balance
AVL
Incr. Surround
Incr. Surround
SAP
Sound
Treble
Bass
Balance
AVL
Incr. Surround
More...
50
50
L
R
On
or Off
Spatial
or Mono
Dolby Virtual
or Stereo
On
or Off
Mono
or Stereo