Av1 Input Jacks - Philips 27PT5441, 32PT5441, 27PT6441, 27PT6442 User Manual

AV (A
4
UDIO
T he TV's audio/video input jacks
are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV1 and AV2 Input Jack connections
are shown on this page, but either
one can be connected alone. Follow
the easy steps below to connect your
accessory device to the AV1 and AV2
IN Jacks located on the back of the
TV.
1
Connect the VIDEO (yellow)
cable to the VIDEO AV1 IN (or
AV2 IN) jack on the back of the
TV.
2
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV1 IN (or AV2 in)
jacks on the rear of the TV.
3
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on
the back of the VCR (either one
or two) or accessory device being
used.
4
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
5 Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the AV button to set the
TV to its AV1or AV2 channel.
7
With either of the VCRs (or
accessory devices) ON and a pre-
recorded tape (CD, DVD, etc.)
inserted, press the PLAY button
to view the tape on the television.
H H
ELPFUL INT
Audio and video cables are not sup-
plied with the TV, but are available
from Philips or electronics retailers.
/V ) I C
IDEO NPUT
Back of TV
1
Monitor out
VIDEO
L/Mono
AUDIO
R
COMPONENT VIDEO INPUT
AV1
2
Connection
R
S-VIDEO
ANT/CABLE
OUT AUDIO OUT
OUT
VCR One (or
5
accessory device) (Equipped
with Audio and Video Output
Jacks)
AV2 Connection
R
ANT/CABLE S-VIDEO
AUDIO OUT
OUT OUT
4
5
VCR Two (or accessory
device) (Equipped with
Video and Audio Output Jacks)
ONNECTION
3
AV2 in
AV1 in
Y
Pb
S-VIDEO
Pr
2
4
1
L
VIDEO
OUT
Back of VCR
7
Video In
(Yellow)
Audio In
(Red and
White)
L
VIDEO
OUT
3
7