Sound Menu Controls - Philips 26PW9100D User Manual

T T T
o adjust your TV sound, use the Sound Menu Controls listed below. o adjust your TV sound, use the Sound Menu Controls listed below.
Follow these steps for Digital Mode
1
Treble: Press CURSOR >
or < to adjust the treble
levels. The control will enhance
the high frequency sounds.
2
Bass: Press CURSOR CURSOR > or CURSOR
< to adjust the bass levels. The
control will enhance the low
frequency sounds.
3 3 3
Balance: Press CURSOR >
or < to adjust the level of
sound coming from the left and sound coming from the left and
right speakers.
4
AVL: (Auto Volume Leveler)
Press CURSOR CURSOR > or < to CURSOR
turn the control On or Off.
When turned On, AVL will
level out the sound being heard
when sudden changes in volume
occur during commercial breaks
or channel changes.
5
Incr. Surround: Incr. Surround: Incr. Surround Press
CURSOR CURSOR CURSOR > or < to select
between Dolby Virtual or
Stereo settings.
6
Alt Audio Program: Press Alt Audio Program
CURSOR > or < CURSOR CURSOR or < or
the appropriate language.
7
Digi Audio Level Press Digi Audio Level: Digi Audio Level Digi Audio Level:
CURSOR CURSOR > or < to turn CURSOR
the control On or Off. Off. Off When
turned Off, Digi Audio Level ff ff, Digi Audio Level
will level out the sound being
heard when sudden changes
in volume occur during
commercial breaks or channel
changes.
8
Digi Audio Digi Audio Out: Out Press Out:
CURSOR > or < to select the
audio system which the TV is
connected to.
H
ELPFUL
To switch between Digital and Analog channels,
use the A/D button on the Remote Control.

SOUND MENU CONTROLS

Digital Mode
Off Off.
to select
H
INTS
Your selection is stored as Personal.
Analog Analog Mode Analog Mode
MENU
< >
16
Follow these steps for Analog Mode
1
Treble: Press CURSOR > or
< to adjust the treble levels.
The control will enhance the
high frequency sounds.
2
Bass: Press CURSOR > or <
to adjust the bass levels. The
control will enhance the low
frequency sounds.
3 3 3
Balance: Press CURSOR >
or < to adjust the level of
sound coming from the left and sound coming from the left and
right speakers.
4
AVL: (Auto Volume Leveler)
Press CURSOR CURSOR CURSOR > or
< to turn the control On
or Off. When turned Off Off. When turned
will level out the sound being
heard when sudden changes
in volume occur during
commercial breaks or
channel changes.
5
Incr. Surround: Incr. Surround Press Incr. Surround:
CURSOR > or < to select
between Dolby Virtual or
Stereo settings, or
select Spatial or Mono.
6
SAP Press CURSOR >
SAP: SAP:
or < to toggle this control to
On or Off. Secondary Audio Off. Secondary Audio Off
Programming (SAP) is sent as a
third audio channel, a SAP signal
can be heard apart from the
current TV program sound.
Note: If SAP is not present
on a selected show, No SAP
will be displayed on the TV
screen.
7
Sound: Sound: Sound Press CURSOR CURSOR > or CURSOR
< to select between Stereo
or Mono settings.
Note: If Stereo is not present
on a selected show and the
TV is in Stereo mode, the
sound coming from the TV
will remain in the monoaural
(Mono) mode.
On, AVL
No SAP No SAP