Disassembling And Reassembling The Radio Ñ General - Motorola P Series Basic Service Manual

Disassembling and Reassembling the Radio Ñ General
4.0 Disassembling and Reassembling the Radio Ñ General
Since these radios may be disassembled and reassembled with the use of only four (board to
casting) screws, it is important to pay particular attention to the snaps and tabs, and how parts align
with each other.
The following tools are required for disassembling the radio:
chassis opener
penknife-size screwdriver
TORXª T6 screwdriver
If a unit requires more complete testing or service than is customarily performed at the basic level,
send this unit to a Motorola Authorized Service Center (See Chapter 1 for a list of authorized service
centers).
The following disassembly procedures should be performed only if necessary:
Chassis Assembly Disassembly (Paragraph 5.2)
Keypad/Option Board and Display Module Disassembly (Paragraph 5.3)
Speaker, Microphone, and Wire Disassembly (Paragraph 5.4)
PTT Disassembly (Paragraph 5.5)
Control Top Disassembly (Paragraph 5.6)
3-3