Physical Unit - GE IC754VSI06SKD User Manual

A 2
6" QuickPanel View Keypad
68
Tr o u b l e s h o o t i n g
P h y s i c a l U n i t
Problem
Slow or sluggish touch response.
After adding expansion memory in
the DIMM connector, the system
won't boot, or if it does boot, an
error message is displayed.
Suggested remedy
Ensure that configured I/O or communications channels
such as serial or Ethernet are operating without error.
These errors can cause higher system overhead leading to
delayed response to touch inputs.
Ensure that flash drives, internal or external, are operating
without error. If the flash drives are highly fragmented or
corrupted, reads and writes to the drive can experience
significant delays leading to delayed response to touch
inputs. Corrupted external flash drives may be corrected
with Storage Manager. See "Storage Manager" on page 18.
When the system is first started, observe the screen to
notice any memory error messages from the boot loader. If
any messages appear, such as "DIMM not 12 row",
"DIMM not 32 bit", "DIMM refresh unsupported", power
down the system and remove the memory module. If the
error message is displayed from the Windows CE desktop,
also power down the system and remove the memory
module. For proper operation, expansion memory
modules must meet the requirements stated in the Design
Specifications.
GFK-2357A