Ford F-250 2017 Owner's Manual page 80

Table of Contents

Advertisement

Movement inside your vehicle.
Change in vehicle inclination, for
example, unwanted towing.
Lock your vehicle using the remote control
or the power door lock control with the
accompanying door open and then close
all doors.
Note: Do not choose full monitor mode if
movement within the vehicle is likely to
occur or when the vehicle is in transport.
Note: For correct operation of the interior
motion detection system, make sure all
windows are closed prior to arming the
system. This helps prevent accidental alarm
activation due to external influences and
make sure of correct interior motion
detection. Additionally, the interior motion
sensing system will not arm if any door is
ajar.
Arming the Alarm
The alarm is ready to arm when there is
not a key in the ignition. Lock your vehicle
to arm the alarm.
The direction indicators flash once after
you lock your vehicle. This indicates the
alarm is in the pre-armed mode. It fully
arms after 20 seconds.
Disarming the Alarm
Disarm the alarm by any of the following
actions:
Press the power door unlock button
within the 20-second pre-armed mode.
Unlock the doors with the remote
control or keyless entry keypad.
Switch the ignition on or start your
vehicle.
Use a key in the driver door lock
cylinder to unlock your vehicle, then
switch the ignition on within 12
seconds.
Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 201710, Second Printing
Security
Note: Pressing the panic button on the
remote control stops the horn and direction
indicators, but will not disarm the system.
77

Advertisement

Table of Contents
loading

Table of Contents