Ford F-250 2017 Owner's Manual page 409

E142551
1. Turn the engine off and block the wheel
that is diagonally opposite of the flat
tire using the wheel chock. Note: Lock
the manual hub on the wheel if the
vehicle is a 4x4.
2. Remove the jack, jack handle, lug
wrench and spare tire from the
stowage locations.
3. Use the tip of the lug wrench to remove
any wheel trim.
4. Loosen each wheel lug nut ½ turn
counterclockwise, but do not remove
them until the wheel is raised off the
ground.
Note: For vehicles with dual rear wheels,
insert the lug wrench extension into the lug
wrench to reach the lug nuts.
F-250 and F-350 Single Rear Wheel
Vehicles
E162801
Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 201710, Second Printing
Wheels and Tires
1.
2. Position the jack according to the
E162802
Front (4x2)
E162803
Front driver side (4x4)
Note: Make sure the jack fits onto the flat
area on the outboard side of the differential.
406
Insert the hooked end of the jack
handle into the jack and use the handle
to slide the jack under the vehicle.
following guides: