4. DOOR SWITCH PART
Downloaded from Fridge-Manual.com Manuals
- Pull the lamp forward, then disassemble the
connector.
- The assembling procedure of new lamp is
the reverse of disassemble steps.
- In removing the door switch, push the door
switch left, insert a pointed rods as screw-
driver in the right gap, and push the rod left
and pull the door switch forward.
- Be careful not to harm the surface of cabinet
. (Use name plate etc. under the pointed rod)
- Pull the door switch forward and remove the
harness.
- In inserting new door switch, insert the left
part of the switch in the hole then push the
right part of refrigerator.
19