Table of Contents
Advertisement
4.
Operation
4.1.
Turning the display on or off
1. Plug the power cord into an AC power outlet. Press
2. Now the display is in standby mode. Wait a moment until the power indicator lights up, then press
display. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER button then the
display may not respond or act wrongly.)
3. Press
button again to turn off the display and put the display in standby mode.
To cut off the power completely, press
Note: If the display does not receive a displaying signal for a certain time, the display goes into standby mode.
4.2.
Home Menu Overview
1. Press
HOME
button and the
2. Press
or
button to select desktop menu option, press
3. Press ▲ ▼
button to move the cursor, press
4. Press
EXIT
button to return to previous menu or exit the menu.
USB Driver
USB Driver
ES File Explorer
Open the
System Setup
menu.
Go to your
USB multi-media
Note:
The layout of menu may vary upon different models you purchased.
Power Switch
Power Switch
on the display.
HOME
menu screen display.
OK
to confirm
Go to your
web Browser
player.
on the display.
OK
to confirm.
Show
Note:
onto your connected USB device. If there is no
USB store, it will be stored on the built-in storage.
Folder's Location: go to
Drive.
Switch to the display menu screen
Switch to different input source, i.e. HDMI, VGA, etc.
9
POWER
to turn on the
all applications
When using the app Camera, store the data
ES File Explorer
USB
or
Hide quick links:
Advertisement
Table of Contents
