External Components - JVC KW-M730BT Instruction Manual

Ñ
3 way speaker system setup
Subwoofer Preout
Mid Range Preout
Tweeter Preout
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Preout
RCA Cable
(Sold separately)
Power amplifier
(optional
accessory)
Input
White
+
White/Black
Gray
+
Gray/Black
Green
+
Green/Black
Purple
+
Purple/Black
Speaker impedance: 4-8 Ω
NOTE
• For speaker system setup, see 3 way speaker
system setup (P.71).
• For speaker setup and crossover setup, see
Controlling Audio (P.69).
• For how to connect speaker wires to terminals
other than speaker terminals and Preout
terminals, see Connecting the system and
external components (P.83) and Connecting
wires to terminals (P.82).
Speaker
To mid range left
speaker
To mid range right
speaker
To tweeter left speaker
To tweeter right
speaker
Ñ
Connecting the system and

external components

8 7
1
2
3
AV Audio output (ø3.5 mini jack)
1
FM/AM antenna input
2
3 When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
SiriusXM Connect Vehicle Tuner connector
4
iDatalink connector
5
AV-IN input (1; Left audio, 2; Right audio, 3;
6
Ground, 4; Visual)
1 2 3 4
7
Accessory 8: GPS Antenna
8
Accessory 4: Bluetooth Microphone
Rear view camera input (Yellow)
9
Visual Output (Yellow)
10
Connection/Installation
10
9
6 5
4
English
83