Basic Operations
Initial Settings
Initial setup
Perform this setup when you use this unit first
time.
1
Set each item as follows.
Language
■
Select the language used for the control
screen and setting items. Default is "American
English (en)".
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For detailed operation, see User Interface
Setup (P.65).
Clock
■
Sets the synchronization of the clock and
adjusts it.
For detailed operation, see Calendar/clock
settings (P.9).
Display
■
If it is hard to see the image on the screen,
adjust the viewing angle.
1 Touch [Display].
2 Touch [Viewing Angle].
3 Select an angle
4 Touch [
].
For detailed operation, see Display Setup
(P.67).
Camera
■
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For detailed operation, see Camera Setup
(P.61).
8
■
This function requires a commercial adaptor.
Consult your JVC dealer for details.
■
Set the demonstration mode. Default is "ON".
1 Touch [DEMO] and set ON or OFF.
2
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.64).
Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be released. Note the Security Code
can be set as the 4 digit number of your
choice.
1
Press the [FNC] button.
h Popup menu appears.
2
Touch [
h HOME screen appears.
3
Touch [
].
OEM SETUP
DEMO
h
].
h
].