Tv Menu Messages - Dell W2306C Owner's Manual

TV Menu Messages

While using your wide LCD monitor, the following messages may appear.
Message
Auto Adjust
Out of Range
No Video Input
TV Button Lock
In Power Save Mode
Press any key on keyboard or
move mouse
In Power Save Mode
Please Check Video Signal
Self Test
94
Troubleshooting Your Wide LCD Monitor
Possible Solution
No action required, the wide LCD monitor is performing an auto
adjustment.
Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
Check all cables are properly connected.
1
Ensure the proper source is selected in the Input Select menu.
2
See "Input Select Menu" on page 85 for more information.
To unlock, press Menu on your remote control, select Setup.
Use the side panel buttons to unlock the TV Menu and side
panel buttons:
Press the Menu button.
1
A message appears stating that the TV Menu and buttons are
locked.
While the message is on the screen, press the volume increase
2
and channel up buttons on the side panel simultaneously.
A message appears stating that the TV Menu and buttons are
unlocked.
If you have a computer connected to the wide LCD monitor and
there is no signal detected, the wide LCD monitor goes in to
sleep mode. The power light is amber when the wide LCD
monitor in is sleep mode.
Press any key on the keyboard or move the mouse to wake the
wide LCD monitor.
If you are using a video device and it has been inactive for
30 minutes the wide LCD monitor goes in to power save mode.
The power light is amber when the wide LCD monitor is in
power save mode.
Appears for computer source when there is nothing plugged in.
Select VGA or DVI from Input Select menu and nothing is
plugged in. Plug a computer in to the VGA or DVI.