Audiovox Video VDS102T Installation Manual page 4

Drop-down video montor

Hide thumbs Also See for Video VDS102T:

Table of Contents

1. Infrared Sensor

– Allows the remote control to operate the VDS102T and to control the shuttle when docked.

2. Three position Dome Light Switch

• Auto – Automatically switches on the dome lights in conjunction with the vehicle's interior

illumination.

• Off –

The dome lights will not turn on in this position.

• On –

Turns on the dome lights.

3. Dome Lights –

Provide additional interior illumination.

4. Channel ( ) Button –

Used this button to increase the channel number to the desired number.

5. Channel ( ) Button –

Used this button to decrease the channel number to the desired number.

6. Auto Program Button –

Allows the user to scan and store active TV stations into memory.

7. Screen Release –

Moves in the direction of the arrow to release the drop down screen.

8. Shuttle Shut-off Switch –

9. Security Lock Knob –

Used to ensure that the shuttle is not released accidentally.

10. 24 Pin Signal Interface Connector –

11. Shuttle Release –

Press to release the shuttle from the docking station.

12. POWER Button –

Used to turn the system ON/OFF. Bright red when system is on, dim when off.

13. FMM Select Button –

When this button is pressed it will turn on the wireless FM Modulator and

then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz;

Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).

14. Source Select Button –

Used to select one of the three sources (DVD, AV1, TV)

Turns off the shuttle when closed.

Used to connect the shuttle to the docking station.

~2~

Table of Contents