In the interest of safety, the VOH642 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.
Congratulations on your purchase of the Audiovox VOH642 drop-down TV / Video Monitor. The VOH642 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
6. Source Select – used to select one of the four A/V sources 7. Sensor Eye – Allows the remote control to operate the VOH642’s OSD (On Screen Display), volume to wired headphone jacks (and optional external speakers), and for control of Video Cassette Player and other accessories 8.
(+ or -) is observed. 3) Slide the cover back until it clicks. The remote control will operate the VOH642, Audiovox Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment...
Page 7
Remote Controlled TV Functions 1. POWER ON/OFF Press this button to turn the VOH642 On. The channel number or current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the VOH642 Off.
Page 8
“GREEN” on the screen, and the non-stored channel numbers are in “RED”. When the skip mode is on, the VOH642 will tune to only the stored channels when using the CHANNEL UP/DOWN buttons. Remote Controlled VCP Functions...
Note: Please refer to page 2 for more information on TV reception. The built-in Turning the VOH642 On or Off 1 Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached.
The VOH642 incorporates an Infrared sensor which relays signals from the remote control to allow the VOH642 and VCP to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as an Audiovox Video Cassette Player.
Once the connections have been made, turn the VOH642 on and press the source button on the VOH642 or the TV / Video button on the remote control until “Video 2” is displayed on the screen. The unit will now play the audio and video signals from the accessory connected.
Page 12
“Video 1” is displayed on the screen. The VCP may also be operated with the remote or the buttons on its face. The VOH642 is now ready to play the audio and video signals from the VCP if it is connected to the “Video 1”...
Page 13
The second video input may be connected to a DVD player, video game system, or other audio / video input. To play the Video 2 source, turn the VOH642 on and press the source button on the VOH642 or the TV / Video button on the remote control until “Video 2”...
Troubleshooting PROBLEM SOLUTION • Poor TV reception Perform auto programming of the tuner. • Verify antenna condition. • Note: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV reception.