Materials Included In This Package; Tools Required - Audiovox Video VDS102T Installation Manual

MATERIALS INCLUDED IN THIS PACKAGE:

1) Over Head Docking Station (P/N 136-3955) – (1 pc)
2) Lamp Harness (P/N 112B3110) – (1 pc)
3) 2 Pin Power Wire Harness with choke (P/ N 112B3143) – (1 pc)
4) Hardware Package
Screws (#4) – (8 pcs)
Self Drilling Screws (#8) – (4 pcs)
Nut – (4 pcs)
5) Trim Ring (P/N 102-4111) – (1 pc)
6) PODTVT (P/N 136-3877) – (1 pc)
7) Mounting Bracket (P/N 108-3856) – (1 pc)
8) Remote Control (P/N 136-3956) – (1 pc)
1
ON OFF AUTO
7

TOOLS REQUIRED:

Nut Driver / Socket Wrench
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary
from vehicle to vehicle)
2
4 5
8
POWER FMM CHANNEL EJECT
ON/OFF SELECT
SOURCE 1 2 3
AUTO
MEMORY 4 5 6
SKIP/
SEARCH 7 8 9
ERASE/ - +
WRITE 0
VOLUME
MUTE SEEK / CH PIX
SEARCH SEARCH
ENTER
MENU SETUP
RETURN REPEAT
SEEK / CH
A-B
TV DVD RADIO TV/CATV
DISPLAY BAND RECALL STORE
AUDIO ZOOM ANGLE SUBTITLE
II PAUSE STOP PLAY
~1~
3
6