Table of Contents
Advertisement
Installing 2.5-inch HDD/SSD
To install a 2.5-inch HDD/SSD:
1.
Remove the side cover of the chassis. Refer to the Removing the side cover section
for more information.
2.
Prepare the 2.5-inch HDD/SDD and the bundled set of screws.
3.
Lay the system on its side on a flat and stable surface.
4.
Locate the HDD cage lock, press it up (A), then swing the HDD cage outwards (B).
5.
Align and insert the 2.5-inch HDD/SSD into the drive bay as shown. Push it all the way
until its screw holes align with the holes on the drive bay.
HDD cage lock
2-16
HDD cage
matching screw holes
2.5-inch HDD/SSD
Chapter 2: Hardware Information
Advertisement
Chapters
Table of Contents
