Table of Contents
Advertisement
Power down the server and peripheral devices if you will be diagnosing the server offline. Always
4.
perform an orderly shutdown, if possible. This means you must:
Exit any applications.
a.
Exit the operating system.
b.
Power down the server (on page 16).
c.
Disconnect any peripheral devices not required for testing (any devices not necessary to power up
5.
the server). Do not disconnect the printer if you want to use it to print error messages.
Collect all tools and utilities, such as a Torx screwdriver, loopback adapters, ESD wrist strap, and
6.
software utilities, necessary to troubleshoot the problem.
You must have the appropriate Health Drivers and Management Agents installed on the server.
•
NOTE: To verify the server configuration, connect to the System Management homepage and select
Version Control Agent. The VCA gives you a list of names and versions of all installed HP drivers,
Management Agents, and utilities, and whether they are up to date.
HP recommends you have access to the SmartStart CD for value-added software and drivers
•
required during the troubleshooting process.
HP recommends you have access to the server documentation for server-specific information.
•
Symptom information
Before troubleshooting a server problem, collect the following information:
What events preceded the failure? After which steps does the problem occur?
•
What has been changed since the time the server was working?
•
Did you recently add or remove hardware or software? If so, did you remember to change the
•
appropriate settings in the server setup utility, if necessary?
How long has the server exhibited problem symptoms?
•
If the problem occurs randomly, what is the duration or frequency?
•
To answer these questions, the following information may be useful:
Run HP Insight Diagnostics (on page 59) and use the survey page to view the current configuration
•
or to compare it to previous configurations.
Refer to your hardware and software records for information.
•
Refer to server LEDs and their statuses.
•
Service notifications
To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport).
Select the appropriate server model, and then click the Troubleshoot a Problem link on the product
page.
Loose connections
Action:
Be sure all power cords are securely connected.
•
Be sure all cables are properly aligned and securely connected for all external and internal
•
components.
Troubleshooting 65
Advertisement
Table of Contents
