Samsung PROXPRESS C301X SERIES User Manual page 128

Installing driver over the network
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on your computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
Description
Installs machine drivers without
prompting any UIs or user
intervention.
Command- line Definition
/p"<port name>" Specifies printer port.
or
/P"<port name>"
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port name,
IEEE1284 port name or network
path.
For example:
• /p"xxx.xxx.xxx.xxx" in where,
"xxx.xxx.xxx.xxx" means IP
address for network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
• /
p"\\computer_name\shared
_printer" or
"\\xxx.xxx.xxx.xxx\shared_pr
inter" in where,
"\\computer_name\shared_
printer" or
"\\xxx.xxx.xxx.xxx\shared_pr
inter" means the network
path to the printer by
entering two slashes, the
computer name or local IP
address of the PC sharing the
printer, and then the share
name of the printer.
2. Using a Network-Connected Machine
128