Installation; Use Of Rigging Bracket - Carrier 50SD030 Installation Instructions Manual

1
y
4
CORNER WEIGHTS (SMALL CABINET)
Unit 024
Total Weight 343
Corner Weight 1 69
Corner Weight 2 53
Corner Weight 3 83
Corner Weight 4 138
Rigging Weight 353
A
B
Fig. 6 - - Unit Leveling Tolerances
OPTIONAL
RETURN
AIR
OPENING
2"
EVAP. COIL COND. COIL
Fig. 7 - - Slab Mounting Detail
2
3
x
C00071
030 Unit
366 Total Weight
74 Corner Weight 1
57 Corner Weight 2
88 Corner Weight 3
147 Corner Weight 4
376 Rigging Weight
Fig. 5 - - 50SD Unit Corner Weights (in Pounds) and Suggested Rigging
C
MAXIMUM ALLOWABLE
DIFFERENCE (in.)
A-B B-C A-C
1/4 1/4 1/4
C99065
OPTIONAL
SUPPLY
AIR
OPENING
C99096
DETAIL A
CORNER WEIGHTS (LARGE CABINET)
036 042
433 460
87 93
68 72
104 111
174 184
443 470
WARNING
!
UNIT FALLING HAZARD
Failure to follow this warning could result in personal injury
or death.
Never stand beneath rigged units or lift over people.

INSTALLATION

The lifting/rigging bracket is engineered and designed to be
installed only on Small Packaged Products. This bracket is to be
used to rig/lift a Small Packaged Product onto roofs or other
elevated structures.
WARNING
!
PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal
injury/death or property damage.
Rigging brackets for one unit use only. When removing a
unit at the end of its useful life, use a new set of brackets.

USE OF RIGGING BRACKET

Field Installation of Rigging Bracket
1. If applicable, remove unit from shipping carton. Leave top
shipping skid on the unit for use as a spreader bar to prevent
the rigging straps from damaging the unit. If the skid is not
available, use a spreader bar of sufficient length to protect the
unit from damage.
2. Remove 4 screws in unit corner posts.
6
A05161
048 060
480 492
97 99
74 76
116 119
193 198
490 502