SMC Networks 7908A-ISP User Manual page 40

Parameter
DHCP Parameters
Function
Default Gateway
Subnet Mask
Name Server 1
Name Server 2
Start IP Address
Number of IP
If the parameters are correct, click Finish to save these settings.
Your Router is now set up. Go to "Troubleshooting" on page A-1 if you
cannot make a connection to the Internet.
N
AVIGATING THE
Description
Shows if DHCP is enabled or disabled.
WAN gateway (only displayed if you have static IP).
WAN subnet mask (only displayed if you have static
IP).
WAN IP address (only displayed if you have static
IP).
WAN IP address (only displayed if you have static
IP).
Specify the start IP address of the DHCP pool. Do
not include the gateway address of the Router in the
client address pool. If you change the pool range,
make sure the first three octets match the gateway's
IP address, i.e., 192.168.2.xxx.
Numbers of IP addresses in the IP address pool.
4-7
M
ANAGEMENT
I
NTERFACE