Answering Machine Settings; Ring Delay; Remote Control Access - Philips CD535 User Manual

Telephone Answering Machine (TAM)
Answer On/Off
Turn answering machine On/Off
m
1. Press , scroll
MENU
m
press SELECT .
:
2. Scroll to On or Off

Answering Machine settings

m
1. Press MENU , scroll
m
SELECT .

Ring delay

This is the number of rings before the answering machine answers and starts playing your greeting. You can set
the answering machine to start playing your greeting after
m
1. Press , scroll
MENU
m m
SELECT , press
:
2. Scroll to your desired ring delay setting
Toll Saver mode can save you the cost of a long-distance call when you check your messages
remotely. If there are new messages in your answering machine, the outgoing message will start
playing after 3 rings. If there are no new messages, the outgoing message will be played after 5 rings.
Hence, if you want to check if you have any messages without incurring call charges, you can hang up
the call after the 4th ring.

Remote control access

This feature lets you check your messages, or otherwise operate your answering machine, by calling the
answering machine and entering a remote access code (which is the same as your Master PIN code) on a tone
dialling phone.
Remote control access is only possible if the Master PIN code has been changed (see page 44) and is
NOT the default (0000).
Activate/Deactivate remote access
m
1. Press MENU , scroll
m :
, scroll
SELECT
2. The current selected option is highlighted.
:
to Answer Machine
m
and press to confirm.
SELECT
:
Answer Machine
to
:
to Answer Machine
Ring delay.
SELECT to enter
(3 - 8
:
Answer Machine
to
to Remote access and press
m
and press , scroll
SELECT
m
and press SELECT , scroll
3 - 8 rings or Toll Saver. The default ring delay is 4.
m
and press , scroll
SELECT
rings or Toll Saver) and press
m
and press SELECT , scroll
m
.
SELECT
:
to Ans. On/Off and
:
Settings
to and press
:
to Settings and press
m
to confirm.
SELECT
:
Settings
to and press
55
EN