Set Date And Time; Make A Call - Philips CD535 User Manual

Set date and time

m
1. Press .
MENU
:
2. Scroll to Clock & Alarm
m
3. Press SELECT to enter
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press
WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.
Now, you are ready to use your phone.
Basic operations of your CD535

Make a call

Enter the phone number (maximum 24 digits) and press
For details, please refer to "Make a call" on page 18.
Answer or end a call
r
Press key to answer a call.
e
Press key to end a call.
For details, please refer to "Answer a call" and "End a call" on page 19.
Switch the handset on/off
e
Press and hold key for 5 seconds to switch off the handset in stand-by mode.
e
Short press key to switch on the handset again.
Keypad lock/unlock
*
Press and hold key for 2 seconds to lock and unlock the keypad in stand-by mode.
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains
charged batteries.
c
Press key on the base until the handset starts to ring.
e
Once retrieved, press
Install
m
and press
SELECT
Set Date/Time.
j
to end the paging.
.
m
SELECT
r
to dial the number.
EN
.
15