Lexus ES 350 Navigation Manual page 54

®
2. Bluetooth SETTINGS
3
Select the desired connection.
4
Check that a confirmation screen is dis-
played when the connection is com-
plete.
 If an error message is displayed, follow the
guidance on the screen to try again.
INFORMATION
●It may take time if the device connection
is carried out during Bluetooth
playback.
●Depending on the type of Bluetooth
device being connected, it may be neces-
sary to perform additional steps on the
device.
●When disconnecting a Bluetooth
device, it is recommended to disconnect
using the system.
54
■ AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (→P.58)
Leave the Bluetooth
tion where the connection can be estab-
lished.
 When the engine <power> switch is in
ACCESSORY or IGNITION ON <ON>
mode, the system searches for a nearby
registered device.
 The system will connect with the registered
device that was last connected, if it is
nearby. When automatic connection prior-
ity is set to on and there is more than one
registered Bluetooth
system will automatically connect to the
®
®
audio
Bluetooth
(→P.58)
®
■ CONNECTING MANUALLY
When the auto connection has failed or
® "Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "MENU" button on the
Remote Touch.
2
Select "Setup".
3
Select "Bluetooth*".
4
Follow the steps in "CONNECTING A
Bluetooth
(→P.53)
*: The Bluetooth
registered
Bluetooth SIG, Inc.
ES350/300h_Navi_OM33C79U_(U)
16.06.14 11:50
®
device in a loca-
®
phone available, the
phone with the highest priority.
®
man-
®
DEVICE" from "STEP 2".
®
word mark and logos are
trademarks owned by