Yamaha RX-V675 Service Manual page 21

(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws ( ① ), 5 screws ( ② ) and screw ( ③ ). (Fig. 1)
b. Lift the rear of the top cover to remove it. (Fig. 1)
2. Removal of Front Panel Unit and Sub-Chassis Unit
a. Remove knob (INPUT) and knob (VOLUME). (Fig. 1)
b. Remove 6 screws ( ④ ) and then remove the front panel unit. (Fig. 1)
c. Remove 2 push rivets and then remove the side plate (L) and side plate (R). (Fig. 1)
d. Remove CB8, CB82, CB302, CB343, CB411, CB412, CB947 and CB952. (Fig. 1)
e. Remove 2 screws ( ⑤ ) and then remove the sub-chassis unit. (Fig. 1)
Side plate (L)
Push rivet
④
⑤
Knob
(INPUT)
④
Knob
(VOLUME)
RX-A730
Top cover
①
CB411
CB947
OPERATION (7) P.C.B.
CB302
⑤
Sub-chassis unit
Front panel unit
Fig. 1
RX-V675/HTR-6066/RX-A730/TSR-6750
③
CB412
CB8
CB82
Side plate (R)
②
①
DIGITAL (1) P.C.B.
CB952
CB343
OPERATION (2) P.C.B.
Push rivet
21