Home Screen - Alcatel ONETOUCH FIRE 4012A Manual

Table of Contents

Advertisement

Charging the battery
Connect the battery charger to your phone.
Make sure the battery is correctly inserted before connecting the
charger.
When using your telephone tor the first time, charge the battery fully
(approximately 5 hours).
The charging status bar will not float if your battery is excessively
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch
off Wi-Fi, GPS, Bluetooth or background running applications when
not in use; reduce the backlight time, etc.
1.2.2
Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide up and touch unlock icon
The Home screen is displayed.
1.2.3
Power off your phone
Hold down the Power key until the pop-up menu appears, select Power
off.
, passcode) if necessary and confirm.
13
1.3

Home screen

Home screen is provided in an extended format to allow more space for
adding applications. Slide the Home screen horizontally left and right to
get a complete view of the Home screen. Orange line on the top left and
right of the screen indicate which screen you are viewing.
1.3.1
Status bar
From status bar, you can view both phone status (on the right side).
GPRS connected
GPRS in use
EDGE connected
EDGE in use
3G connected
3G in use
HSPA (3G+) connected
HSPA (3G+) in use
Connected to a Wi-Fi
network
Bluetooth is on
Connected to a Bluetooth
device
Airplane mode
Alarm is set
GPS is on
Receiving location data
from GPS
Roaming
No SIM card inserted
Vibrate mode
Ringer is silenced
Battery is very low
Battery is low
Battery is partially drained
Battery is full
Battery is charging
Headset connected
No signal (gray)
Signal strength (white)
14

Advertisement

Table of Contents
loading

Table of Contents