Affixing The Cartridge-Slot Labels - Roland LEC-300 Supplemental Manual

Affixing the Cartridge-slot Labels

* In the case of LEF-12, this operation is not required . Go on to "Installing the Ink Cartridges" (p . 8)
Procedure
1.
Open the ink cartridge cover .
2.
Affix the cartridge-slot labels (supplied parts) appropriate for the selected ink mode to the location shown
in the figure .
Ink mode
Gloss mode
White mode
EUVS ink mode
Gloss/White mode
Knob
Hold the knob
Cartridge-slot label
* When the gloss/white mode is selected, there is no need to affix the cartridge-slot labels .
Installing the Ink Cartridges
Locations where the cartridge-slot
labels are affixed
Cartridge-slot labels (supplied parts)
Back of the machine
Ink cartridge cover
1. Changes to the Setup Guide
7