To Customers Who Upgraded The Firmware Of The Machine; Precautions Regarding Saved Settings - Roland LEC-300 Supplemental Manual

To Customers Who Upgraded the Firmware of the Machine

Precautions Regarding Saved Settings

Model
LEC-300/300A/330/540
LEJ-640
LEF-12
If you upgrade the firmware of your machine to the above versions or higher, the bidirectional printing adjustment
specifications will be changed .
Therefore, you have to exercise caution when using the [MEDIA SETTING] and [PRESET] menus, which can be used to save
settings related to bidirectional printing as preset patterns . If you continue to use a preset pattern that was set prior to the
version upgrade, defects such as print position misalignment may occur .
We ask that you reconfigure the settings in the following menus and save a new preset pattern before printing .
Menu
[MEDIA SETTING]
[PRESET]
* If you have purchased a new machine, ignore this section .
28
3. Supplemental
Firmware version
Ver . 6 . 3 0 or later
Ver . 2 . 1 0 or later
Ver . 2 . 1 0 or later
Setting item
"ADJUST BI-DIR"
"ADJUST BI-DIR SIMPLE SETTING"
"ADJUST BI-DIR DETAIL SETTING"