HP ProDesk 405 G1 Microtower Maintenance And Service Manual page 59
Hide thumbs
Also See for ProDesk 405 G1 Microtower:
- Specification (51 pages) ,
- Disassembly instructions manual (16 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket
●
screws through the sides of the bracket into the drive.
4.
Slide the drive into the drive bay (1) and install the four 6-32 mounting screws (2) to secure the
drive in place.
NOTE:
HP has supplied four extra 6-32 mounting screws on the front of the chassis behind the
bezel. When replacing a hard drive, use the four 6-32 mounting screws that were removed from
the old drive to install the new one.
Drives
49
Hide quick links:
Advertisement
Table of Contents
