Switching On The Surfbook - TrekStor SurfBook W2 Operating Instructions Manual

Switching on the SurfBook

Press the on/off switch for about 3 seconds to switch on the
SurfBook. The on/off status LED is illuminated blue and the
SurfBook starts up. A configuration assistant appears directly
after the SurfBook has booted up. Follow the configuration
assistant instructions to set up your SurfBook.
i
NOTE
During the setup process, the configuration assistant will
prompt you to sign in with your Microsoft account. If you
do not yet have a Microsoft account, please set one up at
this point.
As soon as the device has been set up (and every time it is
subsequently switched on and booted up), the lock screen appears.
Press any key on the keyboard to unlock the screen.
i
NOTE
If your SurfBook is password-protected, you must enter the
password now. The start screen then appears.
20 EN