Starting Up The Primebook For The First Time; Charging The Primebook; Switching On The Primebook - TrekStor PRIMEBOOK P14B Operating Instructions Manual

7.

Starting up the Primebook for the first time

First unpack your Primebook. Remove all components from the packaging and
completely remove the packaging material, including the protective film. Check
to ensure that the delivery is complete (see Section 5). If you find that there are
missing or damaged components, contact customer service immediately.

Charging the Primebook

Please fully charge your Primebook before you use it for the first time.
Connect the DC plug of the included power supply to the socket (DC IN) of the
Primebook. Then plug the power supply into an electrical outlet.
ADVICE
i
Only leave the power adapter connected to the power socket until the Primebook is
fully charged. Disconnect the power adapter from the socket first and then remove
the charging cable from your Primebook.
i ADVICE
The maximum battery life is reached after approximately charging cycles.
ADVICE
i
We recommend charging the Primebook while it is switched off. This allows you
to get the maximum charging speed.

Switching on the Primebook

Drücken Sie für ca. 2-3 Sekunden den Ein-/Ausschalter, um das Primebook
einzuschalten. Die Status-LED Ein/Aus beginnt blau zu leuchten und
das Primebook fährt hoch. Direkt nach dem Hochfahren erscheint ein
Konfigurations-Assistent. Befolgen Sie die Anweisungen des Konfigurations-
Assistenten, um Ihr Primebook einzurichten.
ADVICE
i
During the setup process, the configuration assistant will prompt you to sign in
with your Microsoft account. If you do not yet have a Microsoft account, please
set one up at this point.
14