Setting Up The Clock (Turning The Camera [On] For The Fi Rst Time); Checking The Clock Setting; Changing The Clock Setting - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Setting Up the Clock
Initial setting
■
The clock is not set when the camera is
shipped. When you turn the camera on,
the following screen appears.
DISPLAY
1 Press [MENU/SET].
2 Press e/r/w/q to select the date
and time.
CLOCK SET
3
:
0 00
CANCEL
A Time at the home area
B Time at the travel destination
C Appearence
w/q : Select the desired item.
e/r : Set date, time and the display
order for the date and time.
: To cancel without setting the clock.
A
3 Press [MENU/SET].
VQT1L68_DMC-LS80_GN_EN.indd 19 VQT1L68_DMC-LS80_GN_EN.indd 19
MENU
SET
PLEASE SET THE CLOCK
3 CLOCK SET
A
B
. .
JAN 1 2008
. . ：
M/D/Y
C
A SELECT
( P59 )
Preparation
(Turning the camera [ON] for the fi rst time)

Checking the clock setting

1 Press [DISPLAY] several times.
– Current date and time will be displayed
on the bottom left of the screen for
about 5 seconds.

Changing the clock setting

1 Press [MENU/SET].
2 Press e/r to select [CLOCK SET].
3 Press q and perform the above steps 2
and 3 for setting.
4 Press [MENU/SET] to close the menu.
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately 3
months even if the batteries are removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• Set the date so that the correct date is
printed when you order prints or use the
text stamp.
• If the clock is set, the correct date can be
printed even if the date is not displayed
on the screen of the camera.
19
VQT1L68
2007/12/13 11:08:39 2007/12/13 11:08:39