Kenwood KDC-X701 Instruction Manual page 34

TROUBLESHOOTING
Symptom Remedy
"ADD ERROR" New station creation is unsuccessful.
"CHECK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.
"NO STATIONS" No stations are found.
"STATION LIMIT" The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
"CONNECT ERROR" Communication is unstable.
"RATING ERROR" Registration of thumbs up/thumbs down has failed due to
insufficient network connectivity.
"THUMBS N/A" Registration of thumbs up/thumbs down is not allowed.
"LICENSE ERROR" You try to access from a country which Pandora is not
deliverable.
iHeartRadio station If "Explicit Content" in [Account Settings] is checked in
cannot be selected. the web version of iHeartRADIO, custom stations become
unavailable.
"NOT CONNECTED" Link to the application is impossible.
"CHAN LOCKED ENTER The selected channel is locked. Enter the correct pass code to
CODE:" unlock. ( 16)
"CH UNSUBSCRIBED" The selected channel is unsubscribed. Call 1-866-635-2349 in
the U.S.A. or 1-877-438-9677 in Canada to subscribe. ( 14)
"CHAN UNAVAILABLE" The selected channel is unavailable. Visit www.siriusxm.com
for more information about the SiriusXM channel lineup.
"CHECK ANTENNA" Check that the antenna and its connection are in good
condition.
"CHECK TUNER" Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
30
ENGLISH
Symptom Remedy
"NO SIGNAL" Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTION Your subscription is updated. Press the volume knob to
UPDATED – PRESS continue.
ENTER TO CONTINUE."
"CODE ERROR" Make sure you have entered the correct pass code. ( 16)
"NO CONTENT" There is insufficient content to start TuneScan.
"SCAN CANCEL" TuneScan has been aborted.
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
Bluetooth pairing • Make sure you have entered the same PIN code to both
cannot be made. the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 17)
Echo or noise is heard • Adjust the microphone unit's position. ( 17)
during a phone • Check the [ECHO CANCEL] setting. ( 19)
conversation.
• Reduce the distance between the unit and the
Phone sound quality
is poor. Bluetooth device.
• Move the car to a place where you can get a better
signal reception.
• Use voice calling method in a more quiet environment.
Voice calling method is
• Reduce the distance from the microphone when you
not successful.
speak the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being • Reduce the distance between the unit and the
interrupted or skipped Bluetooth audio player.
during playback of a • Turn off, then turn on the unit and try to connect again.
Bluetooth audio player. • Other Bluetooth devices might be trying to connect to
the unit.